Jason Cook

Wed, 07 Jul 2021 20:29:39 -0400

jason@hub.inktada.com

First coat of gloss white, then wet sanded with 400 grit. There will be two or three more coats each with sanding. Final goat will be sanded with 2000 grit and polished from there.

EZI-65 Next High Powered Rocketry

Sat, 10 Jul 2021 20:45:53 -0400

Freddy WILLEMS

frewi80@hub.inktada.com

Looks very cool Jason...

Sat, 10 Jul 2021 21:21:55 -0400

FourOh-LLC

fouroh-llc@hubzilla.factoryfouroh.net

Jason is a person I suspect is pushing the envelope on 3D printing, the rest of his involvement in science I would not understand. I look forward to his posts and his photos here on Fediverse.

Sun, 11 Jul 2021 16:45:58 -0400

Jason Cook

jason@hub.inktada.com

Update:
Hopefully I just put the final coat of paint on the nosecone. I'll wait two days for it to cure. If all looks good, 2000 grit sanding followed by polishing. If it does not look good, one more coat.

I also put the last coat of primer filler on the main body of the rocket, it's looking clean. Sanding with 220 grit will tell, I'll then re-sand with 400 grit so it is ready for its first coat of paint.

All this sanding is getting me back in shape! Wax on wax off.