-

Thu, 25 Nov 2021 11:05:48 -0500

jason@hub.inktada.com

Hours of sanding the epoxy finishing layer is complete. Next step is to paint with gray primer/filler. Then dremel work to remove nubs followed by detail sanding.

Panda High Powered Rocketry

Thu, 25 Nov 2021 17:51:21 -0500

Jason Cook

jason@hub.inktada.com

First coat of primer filler. Won't be able to sand until tomorrow. There is still quite a bit of sanding left to do before the imperfections are gone.

Sun, 05 Dec 2021 12:54:35 -0500

Jason Cook

jason@hub.inktada.com

Performed about 1.5 hours of sanding today, followed by a second heavy coat of primer. It's looking good. One more coat of primer and it should be ready for the first coat of paint.